Smartscan Safety Light Curtain T4HD: Dipswitch (Learned) Settings

Learned Settings Mode 

Learned Mode is the mode that allows the user to access the following functions:
 (To view the functions available in the learned mode scroll down)

1. Fixed Beam
2. Partial Muting
3. Press Mode
4. Mute disparity /Mute delay OFF modes
5. Clear (All Learned functions)

Entering the Learned Mode

The following steps are required to enter the Learned Mode.

• Step 1: Turn Power OFF
• Step 2: Select any learned mode dip switch setting as in the diagram below
• Step 3: Turn Power ON

Once power turns ON. The all LED’s in the Receiver column (RX) will turn ON steady. At this time the safety outputs (OSSD’s will remain OFF). The light curtain is now in Learned Mode.

Exit Learned Mode

To exit the Learned Mode apply one of the three start up modes:

• Automatic Restart
• Manual Restart
• Restart Interlock

Then cycle power(Turn power OFF then ON).

There are currently 6 functions available in the learned mode. A brief description of the function is given below each accessible function.(Click on the underlined text or the picture for more details)

Fixed Beam Blanking

Deselecting specific beams in the light curtains sensing region.

N/A

Mute Timer Mode 2

Mute Disparity - 2 Secs
Mute Off - 1 Secs.

Mute Timer Mode 3

Mute Disparity - 4 Sec.
Mute Off - 2 Secs.

Mute Timer Mode 4

Mute Disparity - 250 msec.
Mute Off - 0 Secs.

Partial Muting

Muting a defined area in the sensing region

N/A

Clear

Clears all the functions activated in the learned mode.