Smartscan Incorporated
  • Home
  • Products
    • SG Series
    • T4Series
    • Pallet Safe
    • 8K3 Series
    • 1000 Seies
    • Non- Safety Light Grid
    • Safety Modules
    • Acessories
  • Applications
    • Manual Load and Unload
    • Robotic Applications
    • End of Line Packaging
    • Cold Room / Freezer Application
  • Product Support
  • Safety Standards
  • Representation
  • Contact Us

Smartscan Safety Light Curtain SG: Fixed Beam Blanking(Learned Mode)

Fixed beam blanking allows the user to deselect a fixed area of beams in the Light Curtain’s sensing field. This is typically used when stationary objects, fixtures, tables, etc are permanently obstructing a portion of the sensing field. The remaining unobstructed area of the light curtains sensing field remains active and if something obstructs the active sensing a signal is sent to the OSSD’s unless other features are applied (i.e. muting, floating blanking) 
Picture
This feature is available in the Learned Mode. . To configure Fixed Beam Blanking using the following steps:
  1. Turn power OFF
  2. Configure dipswitches as in the diagram to the left
  3. Place obstruction in light curtain sensing region. Obstruction can be placed in light curtain upon original startup.
  4. Turn power ON, wait for ALL LED's to illuminate in receiver (RX) column.
  5. Apply Exit Learned Mode procedure. If done with learned mode or apply another feature.

Picture
Picture
The information and drawings contained herein are the sole property of Smartscan Incorporated. The informationon this website is subject to change without notice. Smartscan Incorporated shall not be liable for any errors contained herein for incidental or consequential damages in connection with the performance or use of this material.