Smartscan Safety Light Curtain SG: Dipswitch Settings
The dip switches are located under the removable cap near the cable connector of the receiver column (labeled RX).
There are two modes of dip switch setting for the T4 light curtain system Direct Settings and Learned Settings. Below are descriptions of the direct and learned settings modes with a list of functions that can be applied in each setting. (Click on the highlighted text box of the mode or interest)
Direct settings are the functions that are available “out of the box”. No steps are needed to reach these functions. Place the dipswitches is the desired position then the functions desired are applied There are (4) four features available in the Direct Settings mode:
|
Learned setting are functions that require multiply steps to be applied. This mode allows the user to access the following functions:
|